Difference between revisions of "Tilting Hokuyo"

From Healthcare Robotics Wiki
Jump to: navigation, search
(What this does)
Line 28: Line 28:
 
[[Image:utm-servo-bracket.jpg|thumb| Image of the solidworks part for the bracket to mount the UTM on to the servo.]]
 
[[Image:utm-servo-bracket.jpg|thumb| Image of the solidworks part for the bracket to mount the UTM on to the servo.]]
 
This is the hardware setup that we use:
 
This is the hardware setup that we use:
* Tilting servo: Robotis Servo (typically we use RX-28) http://www.crustcrawler.com/motors/RX28/index.php?prod=66
+
* Tilting servo: Robotis Servo (typically we use RX-28) (details [http://www.trossenrobotics.com/dynamixel-rx-28-robot-actuator.aspx?af=Hizook here])
* This gives a serial interface to control the servo: http://www.crustcrawler.com/electronics/USB2Dynamixel/index.php?prod=65
+
* This gives a serial interface to control the servo: [http://www.trossenrobotics.com/robotis-bioloid-usb2dynamixel.aspx?af=Hizook USB2dynamixel]
 
* Hokuyo UTM. (http://www.acroname.com/robotics/parts/R314-HOKUYO-LASER4.html)
 
* Hokuyo UTM. (http://www.acroname.com/robotics/parts/R314-HOKUYO-LASER4.html)
 
* Bracket to mount the Hokuyo on to the servo.
 
* Bracket to mount the Hokuyo on to the servo.

Revision as of 23:04, 22 March 2010

Author

Advait Jain (http://www.cc.gatech.edu/~advait)

What this does

Tilting the Hokuyo using a servo and reading back the servo encoder position while getting scans from the Hokuyo allows us to generate a 3D point cloud of the world in front of the robot. We have used this 3D point cloud for object segmentation, door handle detection etc.

We first used this sensor in this paper: EL-E: An Assistive Mobile Manipulator that Autonomously Fetches Objects from Flat Surfaces. Advait Jain and Charles C. Kemp. Autonomous Robots, 2009. This paper and others can be downloaded from the Heathcare Robotics Lab website (http://www.healthcare-robotics.com)


Pictures of the Setup

Hardware

Image of the solidworks part for the bracket to mount the UTM on to the servo.

This is the hardware setup that we use:

  • Tilting servo: Robotis Servo (typically we use RX-28) (details here)
  • This gives a serial interface to control the servo: USB2dynamixel
  • Hokuyo UTM. (http://www.acroname.com/robotics/parts/R314-HOKUYO-LASER4.html)
  • Bracket to mount the Hokuyo on to the servo.
    • This is a custom part that we have designed.
    • The solidworks CAD file (utm-servo-bracket.sldprt). This requires Solidworks 2009.
    • We have taken two routes for making the bracket
      1. buy Aluminium channels from http://mcmastercarr.com and drill the appropriate holes.
      2. use http://www.mfg.com to get the part manufactured from the CAD file. Will take between a week to 10 days.
    • We thank Abhishek Bhatkhande for making the CAD model from the bracket design.
  • Screws:
    • Four M2x4 (2mm diameter, 4mm length) to connect the servo to the bracket.
    • Two M3x6 or M3x8 to connect the UTM to the bracket.
    • Longer screws will require washers.

Code