PR2 Tool Adapter
Advait Jain (http://www.cc.gatech.edu/~advait), Advisor: Prof. Charlie Kemp
What this does
Adapter that can be used to have the PR2 grab onto different tools (which can be screwed onto this adapter). This was inspired by the method used to enable PR2s to grasp flags at the 'PR2 graduation event'.
- We designed the hook in Solidworks and printed it on a 3D printer.
- The mounting holes in the base of the hook match an ATI Mini40 force torque sensor or the Hook_End_Effector.
- You will need to thread the holes on the top of the adapter (M3 tap).