Difference between revisions of "PR2 Tool Adapter"

From Healthcare Robotics Wiki
Jump to: navigation, search
(Hardware)
(Hardware)
Line 7: Line 7:
 
== Hardware ==
 
== Hardware ==
 
*We designed the hook in Solidworks and printed it on a 3D printer.
 
*We designed the hook in Solidworks and printed it on a 3D printer.
** Solidworks CAD file ([[Media:hook.sldprt|hook.sldprt]]). This requires Solidworks 2009.
+
** Solidworks CAD file ([[Media:pr2_tool_adapter.sldprt|pr2_tool_adapter.sldprt]]). This requires Solidworks 2009.
** STL file ([[Media:hook.stl|hook.stl]]).
+
** STL file ([[Media:pr2_tool_adapter.stl|pr2_tool_adapter.stl]]).
 
* The mounting holes in the base of the hook match an ATI Mini40 force torque sensor. (http://www.ati-ia.com/products/ft/ft_models.aspx?id=Mini40) or the [[Hook_End_Effector]].
 
* The mounting holes in the base of the hook match an ATI Mini40 force torque sensor. (http://www.ati-ia.com/products/ft/ft_models.aspx?id=Mini40) or the [[Hook_End_Effector]].
 
* You will need to thread the holes on the top of the adapter (M3 tap).
 
* You will need to thread the holes on the top of the adapter (M3 tap).
Line 19: Line 19:
 
File:pr2_hook.jpg| PR2 after grabbing onto the adapter (In this image there is a force torque sensor between the adapter and the hook).
 
File:pr2_hook.jpg| PR2 after grabbing onto the adapter (In this image there is a force torque sensor between the adapter and the hook).
 
</gallery>
 
</gallery>
 
[[File:pr2_adapter_solidworks.jpg]]
 

Revision as of 16:31, 25 May 2011

Author

Advait Jain (http://www.cc.gatech.edu/~advait), Advisor: Prof. Charlie Kemp

What this does

Adapter that can be used to have the PR2 grab onto different tools (which can be screwed onto this adapter). This was inspired by the method used to enable PR2s to grasp flags at the 'PR2 graduation event'.

Hardware