Difference between revisions of "PR2 Tool Adapter"

From Healthcare Robotics Wiki
Jump to: navigation, search
(Hardware)
(Code)
Line 11: Line 11:
 
** STL file ([[Media:hook.stl|hook.stl]]).
 
** STL file ([[Media:hook.stl|hook.stl]]).
 
*The mounting holes in the base of the hook match an ATI Mini40 force torque sensor. (http://www.ati-ia.com/products/ft/ft_models.aspx?id=Mini40) or the [[Hook_End_Effector]].
 
*The mounting holes in the base of the hook match an ATI Mini40 force torque sensor. (http://www.ati-ia.com/products/ft/ft_models.aspx?id=Mini40) or the [[Hook_End_Effector]].
 
== Code ==
 
* ROS (http://www.ros.org)
 
* The code that we used to enable the robot to open drawers and doors using this hook as the end effector can be downloaded from our ROS repository. You will need the following ROS packages from our public ROS repository (available at http://code.google.com/p/gt-ros-pkg/wiki/hrl_content_summary)
 
*# code_publications/2009_humanoids_epc_pull (http://code.google.com/p/gt-ros-pkg/source/browse/#svn/trunk/hrl/code_publications/2009_humanoids_epc_pull)
 

Revision as of 19:19, 25 May 2011

Author

Advait Jain (http://www.cc.gatech.edu/~advait), Advisor: Prof. Charlie Kemp

What this does

Adapter that can be used to have the PR2 grab onto different tools. This was inspired by the method used to enable PR2s to grasp flags at the 'PR2 graduation event'.

Hardware

Image of the solidworks part for the hook that mounts on to an ATI Mini 40 Force/Torque sensor.