Difference between revisions of "PR2"

From Healthcare Robotics Wiki
Jump to: navigation, search
(Troubleshooting)
(Reference)
Line 35: Line 35:
 
* [http://www.ros.org/wiki/pr2_robot/Troubleshooting Stack Trouble Shooting]
 
* [http://www.ros.org/wiki/pr2_robot/Troubleshooting Stack Trouble Shooting]
 
* [http://www.ros.org/wiki/pr2_robot/Troubleshooting/PR2Systemcheck PR2Systemcheck]
 
* [http://www.ros.org/wiki/pr2_robot/Troubleshooting/PR2Systemcheck PR2Systemcheck]
 
+
* [[PR2/ROS/HRL Related Issues]]
 
==== Support Materials ====
 
==== Support Materials ====
 
* Willow Garage [http://support.willowgarage.com/home support site]
 
* Willow Garage [http://support.willowgarage.com/home support site]

Revision as of 16:29, 30 June 2010

Pr2 flex.jpgPr2 flex.jpgPr2 flex.jpg Pr2 flex.jpg


This is the landing page for collecting PR2 related information useful for the Georgia Tech PR2 team. More information on our project can be found in Willow's blog post here.


Rules

  • The PR2 must be attended while operating.
  • Always have the wireless run-stop in hand before running the robot.
  • Be wary of the grippers and wrist joints as they are normally fairly stiff and have a number of pinch points.
  • Follow all Willow safety instructions (see links in the reference section)
    • No screws
    • No liquids
    • No sharp objects
    • Don't place stuff on top of the robot (ever!)
    • Don't put fingers where they don't belong
  • When leaving for the night, taking long breaks, etc:
    • Activate the back run-stop
    • Activate the wireless run-stop
    • Place the wireless run-stop, and PS2 game pad on the base station table.
    • Plug the robot into an empty wall socket (IMPORTANT). As the PR2 draws a great deal of power, there is a risk of fire if you plug it into an overloaded socket.
    • Plug a live network cable into its WAN port
    • Place the robot in an appropriate holding area:
      • The preferred location is in the living room area of the lab. Please note that areas near doorways and tight corridors are especially inappropriate as it is nearly impossible/dangerous for untrained personnel to move the robot.
      • Make sure that there aren't anything that will be knocked over/damaged if the robot needs to calibrate.

General Information

Reference

Troubleshooting

Support Materials