Difference between revisions of "Neuronics"

From Healthcare Robotics Wiki
Jump to: navigation, search
(Katana)
(Katana)
Line 17: Line 17:
  
 
Also refer to:
 
Also refer to:
[[File:pins drawing]]
+
*[[File:pins drawing]]
[[File:example cable]]
+
*[[File:example cable]]

Revision as of 17:04, 23 November 2009

UnikitSDK

The UnikitSDK costs €4880 (not including shipping). Its package contents include:

  • Three motors and three motor controllers in an acrylic box.
  • A power adaptor for the above.
  • USB-CAN adaptor, specifically Peak System's PCAN-USB IPEH-002021 (link)
  • A manual
  • A LiveCD containing Ubuntu 8.04 and the SDK

Katana

From conversations with the support staff at Neuronics, we received the following information for interfacing with the Katana:

 Position 1 is a 14Pin Flatband 
 cable.
 
 connect  CAN-L to Pin2 and CAN-H to Pin 7 of a D-sub9 Female connector for 
 your white pcan usb inteface. Keep the cables of the dsub9 connector short to 
 avoid reflections on the canbus. (Very important !!)

Also refer to: