Difference between revisions of "Kinematic Trajectory and Force Capture System"

From Healthcare Robotics Wiki
Jump to: navigation, search
Line 21: Line 21:
* Handheld Hook: See images and the CAD Models.
* Handheld Hook: See images and the CAD Models.
<gallery caption="Handheld Hook" widths="150px" perrow="5">
<gallery caption="Handheld Hook" widths="150px" perrow="5">
File:hook_handheld.JPG| [[Media:hook_handheld.sldprt|hook_handheld.sldprt]]
File:hook_checkerboard_1.JPG| [[Media:hook_checkerboard_1.sldprt|hook_checkerboard_1.sldprt]]
File:hook_checkerboard_2.JPG| [[Media:hook_checkerboard_2.sldprt|hook_checkerboard_2.sldprt]]
File:hook_checkerboard_3.JPG| [[Media:hook_checkerboard_3.sldprt|hook_checkerboard_3.sldprt]]
File:hook_adaptor_nano.JPG| [[Media:hook_adaptor_nano.sldprt|hook_adaptor_nano.sldprt]]
File:hook_extender_nano.JPG| [[Media:hook_extender_nano.sldprt|hook_extender_nano.sldprt]]

Revision as of 21:00, 13 July 2010


Advait Jain (http://www.cc.gatech.edu/~advait)

What this does

This page describes the capture system that we designed to log the kinematic trajectory through which mechanisms (doors and drawers) move and the forces used to operate them.

We first used this setup in this paper: The Complex Structure of Simple Devices: A Survey of Trajectories and Forces that Open Doors and Drawers. Advait Jain, Hai Nguyen, Mrinal Rath, Jason Okerman, and Charles C. Kemp. IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BIOROB), 2010. This paper and others can be downloaded from the Heathcare Robotics Lab website (http://www.healthcare-robotics.com)

Picture of the Setup

Capture setup.jpg Handheld hook.jpg


Image of the solidworks part for the bracket to mount the UTM on to the servo.

This is the hardware setup that we use:

  • Camera: Point Grey DragonFly2 with remote head
  • Lens: Varifocal Video Lens 4mm - 12mm (Stock Number: NT58-365) ($150.00) link
  • Tripod for the camera.
  • Studio Lights
  • Laptop: Anything that runs Ubuntu and has a firewire port. Four pin firewire port will require a hub and external power to provide power to the DragonFly.
  • Mount for the DragonFly: See Image and the CAD Models.
  • Handheld Hook: See images and the CAD Models.
  • Checkerboard patterns: Checked into the subversion repository with all the code.
  • Force Torque Sensor: ATI Nano 25 with a calibration of SI-125-3 and the Controller F/T System (link)